Possible Causes
Stop errors are mostly application errors which occur when the Windows kernel detect an error which it cannot recover. There are lots of factors that would lead to these system hangs or memory dumps. Usually, the computer halts and what follows throughout is a set of diagnostic information displayed on a blue screen. The contents of the PC's memory might be dumped to a file for later analysis. Which stop errors occur, the only step the user can take is to restart the computer and the same problem might come back if the root cause is not resolved.
The following are the errors which can be there:
Software Errors in Windows Operation
Recently installed software, device drivers or modified registry settings can corrupt the system resulting in a stop error, both constantly or triggered under certain circumstances.
Hardware Errors in Windows Operation
When a hardware device malfunctions, is removed or recently added during a windows operation or start up, a hardware stop error might occur. This happens when the operating system detects a clash between the hardware and device driver, or incompatible hardware and wrong BIOS settings.
Intermittent Errors
Random physical and logical errors like defective system memory, failed hard disk or over-heating processor could trigger blue screen dump.
Solution
It is not easy to come up with a precise set of instructions for every possible error. Nevertheless here are some basic solutions.
Dealing through Software Errors
If the blue screen occurs after installing a software application or device driver, it is possible that the software is incompatible with the system. To fix this error, boot into safe mode from the Windows Startup menu and remove any unwanted files and programs that may be causing the problem. If the registry is modified, restore all settings back either manually or restore the registry from a backup archive. If it’s running on Windows XP, it can alternatively attempt to perform a system restore to revert all settings to a safe point.
Dealing by Hardware Errors
If operating on a defective hardware causes a blue screen to occur, ensure that the hardware is compatible with system by reading up on the hardware and motherboard manual. Firstly, try to trouble shoot and eliminate any defective hardware. And also try to install the latest fixes that hardware and motherboard manufacturers offer. If the problem continues, remove or change the hardware. If there is any modification in BIOS such as over clocking, troubleshoot the BIOS error by the settings back to creative values or set it to default.
Dealing through Intermittent Errors
If received an error messages or warnings that hardware such as the memory or hard disk might be defective, a common technique is to substitute in new hardware components to replace the suspected parts until the faulty part is identified. Some hardware diagnostic program might also help. At time, there is need to test hardware on other workstations to identify the source of the problem. Take note that an overheating computer might cause erratic behavior and at last lead to system.If you need any further assistance regarding help for Fixing Blue Screen Dump Error, please visit http://www.livetechcare.com
No comments:
Post a Comment